Printing Equipment & Machinery - Search Results - Page 1 
Offset Press 2000 Heidelberg Speedmaster SM 102-8, Perfector: Yes, Perfector Location: Between 4 & 5, S/N: 543038, Imp. circa: 291000000, Paper size: 720 x 1020 mm, Features: 13000 sph, Alcolor Dampening, Alcosmart, Automatic Blanket Roller and Impression Cylinder Wash, Autoplate, Bacher pin register on clamps, CP2000, Chrome Blanket Cylinders, Diagonal Register, Double sheet detector, Electronic sidelay control, Grafix powder spray, Heidelberg AirStar, Heidelberg CleanStar, High pile delivery, Intercom, Preset, Preset Feeder, Prinect Press Center, Sheet Decurler, Silver Series Machine, Steel plate in delivery, Steel plate in feeder, Stream Feeder, Technotrans CombiStar CAN with AlcoSmart, Technotrans Refrigerated Recirculator.
Offset Press 2001 Heidelberg Speedmaster SM 102-6 + L, Perfector: Yes, Perfector Location: Between 2 & 3, S/N: 544046, Imp. circa: 300000000, Paper size: 720 x 1020 mm, Features: 15000 sph, Alcolor Dampening, Automatic Blanket Roller and Impression Cylinder Wash, Autoplate, Bacher pin register on clamps, CP2000, Diagonal Register, Electronic sidelay control, Grafix powder spray, Heidelberg CombiStar with CAN, Heidelberg DryStar 2000 with CAN, High pile delivery, In-line coater, Ink temperature control, Preset, Silver Series Machine, Steel plate in delivery, Steel plate in feeder, Stream Feeder, Technotrans CombiStar CAN with AlcoSmart, Ultrasonic double sheet detector.
Offset Press 1995 Heidelberg Speedmaster SM 52-6, Perfector: Yes, Perfector Location: Between 1 & 2 and 2 & 3, S/N: 200061, Imp. circa: 248000000, Paper size: 370 x 520 mm, Features: 15000 sph, Alcolor Dampening, Automatic Blanket Roller and Impression Cylinder Wash, Autoplate, Bacher pin register on clamps, CPC 1.04, CPTronic, Diagonal Register, Double sheet detector, Grafix powder spray, Low pile delivery, Non-stop delivery, Non-stop feeder, Preset, Preset Feeder, Stream Feeder, Suction Tape on Feeder, Technotrans Refrigerated Recirculator.
Offset Press 2001 Heidelberg Speedmaster SM 102-5 + LX, Perfector: Yes, Perfector Location: Between 2 & 3, S/N: 544139, Paper size: 720 x 1020 mm, Features: Alcolor Dampening, Automatic Blanket Roller and Impression Cylinder Wash, Autoplate, Bacher pin register on clamps, CP2000, Electronic sidelay control, Extended delivery, Grafix IR Dryer, Heidelberg CombiStar with CAN, High pile delivery, Hot air knife, In-line coater, Ink temperature control, Intercom, Interdeck UV Dryer, Light pen & smart card reader, Non-stop delivery, Pre-loader, Preset, Preset Feeder, Steel plate in delivery, Steel plate in feeder, Stream Feeder, Technotrans Beta, UV Dryer.
Offset Press 2000 Heidelberg Speedmaster SM 52-5 + LX, S/N: 203538, Imp. circa: 85000000, Paper size: 370 x 520 mm, Features: 15000 sph, Alcolor Dampening, Alcolor Vario Dampening, Automatic Blanket Roller and Impression Cylinder Wash, Autoplate, Bacher pin register on clamps, CPC 1.04, CPTronic, Diagonal Register, Double sheet detector, Extended delivery, Grafix powder spray, Heidelberg DryStar IR Dryer, Hot air knife, In-line coater, Light pen & smart card reader, Non-stop delivery, Non-stop feeder, Preset, Sheet Decurler, Straight Machine, Stream Feeder, Suction Tape on Feeder, Technotrans Refrigerated Recirculator.
Offset Press 2004 Heidelberg Speedmaster SM CD 74-5 + LX C, S/N: Pending, Imp. circa: 325000000, Paper size: 530 x 740 mm, Features: 15000 sph, Alcolor Vario Dampening, Automatic Blanket Roller and Impression Cylinder Wash, Autoplate, Bacher pin register on clamps, C Format: 53 x 74 cm, CP2000, Chrome Plate Blanket & Impression Cylinder, CombiStar refrigeration with ink temperature control, Diagonal Register, Double sheet detector, Electronic sidelay control, Extended delivery, Grafix Exatronic powder spray, Heidelberg AirStar, Heidelberg DryStar IR Dryer, High pile delivery, In-line coater, Non-stop delivery, Non-stop feeder, Preset, Preset Plus Delivery, Preset Plus Feeder, Silver Series Machine, Steel plate in delivery, Steel plate in feeder, Straight Machine, Stream Feeder, Suction Tape on Feeder, Technotrans Combistar, Ultrasonic double sheet detector.
Drill 2000 Challenge Century, S/N: 64345, Paper size: 280 x 440 mm, Features: Floor model, Motorized head, One head, Semiautomatic.
Folder 2005 Baum 714, S/N: 86-D-211, Paper size: 360 x 520 mm, Features: Air feed, Quick set, Table top, Two plates.
Folder 1992 MBO T-49 / 4, S/N: P2/08, Paper size: 520 x 840 mm, Features: 1st Unit - 4 plate folds, Air feed, Belt delivery, Combo rollers, Control box, Counter, Pile feeder, Quick Set.
Folder 2008 Stahl B-23 / 44, S/N: 123RI0007, Paper size: 580 x 940 mm, Features: 1 right angle, 1st Unit - 4 plate folds, 2nd Unit - 4 Plate folds, Air feed, Belt delivery, Combo rollers, Continuous feeder, Counter, Parallel Section, Pre-slitter shaft, Quick Set, Slit/Score/Perforate in parallel section, Zero Speed Folding Plate Deflectors.
Folder 1995 Stahl T-36 / 44, S/N: 81395-236066, Paper size: 360 x 540 mm, Features: 1st Unit - 4 plate folds, Air feed, Belt delivery, Combo rollers, Continuous feeder, Counter, Miniature Stacker, Pile feeder, Quick Set.
Paper Cutter 2001 Saber S115, S/N: 61601, Paper size: 1150 x 1150mm, Features: Automatic, Floor Stand, Safety lights.
Die Cutter 1979 Gietz FSA 720, S/N: 11406, Paper size: 520 x 720 mm, Features: Dimensions: 4.3 x 3.6 x 1.9 m, Feeding Pile Height: 950mm, Foil Stamping, Foil feeding units: 3, Max. Paper Thickness: 0.5mm, Max. Sheet Size: 720 x 520 mm, Max. Speed: 5000 sph , Maximum foil diameter: 160mm 1" core, Min. Paper size: 297 x 210mm, Programmable foil advance, Total Power: 34kw, Total Weight: 7.0 Tons .
Die Cutter 1959 Heidelberg S, S/N: 12562, Paper size: 520 x 720 mm, Features: 4000 strokes per hour, Max. Blank Size: 21.25" x 28.5", Min. Sheet size: 4.5 x 6.25", Weight: 10350 lbs..
Die Cutter 2025 Royo Machinery ML2500, S/N: 759870B, Paper size: 2500 x 1500 mm, Features: 5mm steel plate, Air clutch, CE Standard Machine, Central lubrication with auto pump , Corrugated board up to 8.5mm, Cycle control: Single cut and stop at the open position - time delay open position - continuous cycle, Dimensions: 142" x 88.5" x 98.5", Dust cover curtain, Gantry for chase removal, Hand Feed, IR safety lights, Inner chase size: 98.5" x 59", Max. Speed: 12 +/-2 strokes per minute, Max. die cutting length: 2756", Micro adjustment device, Paper or cardboard thickness: 100-2000 gsm, Pneumatic die plate ejector, Suggested HS code: 8443.19.8000 (Manual), Total Power: 22kw, Total Weight: 18.5 Tons, Triple electromechanical safety device, Voltage: 220V 3PH 60Hz.
Die Cutter 2023 Royo Machinery ML2500, S/N: pending, Paper size: 2500 x 1500 mm, Features: 5mm steel plate, Air clutch, CE Standard Machine, Central lubrication with auto pump , Corrugated board up to 8.5mm, Cycle control: Single cut and stop at the open position - time delay open position - continuous cycle, Dimensions: 142" x 88.5" x 98.5", Dust cover curtain, Gantry for chase removal, Hand Feed, IR safety lights, Inner chase size: 98.5" x 59", Max. Speed: 12 +/-2 strokes per minute, Max. die cutting length: 2756", Micro adjustment device, Paper or cardboard thickness: 100-2000 gsm, Pneumatic die plate ejector, Suggested HS code: 8443.19.8000 (Manual), Total Power: 22kw, Total Weight: 18.5 Tons, Triple electromechanical safety device, Voltage: 220V 3PH 60Hz.
Die Cutter 2024 Royo Machinery ML750, S/N: 749780B, Paper size: 530 x 750 mm, Features: Central lubrication with auto pump , Dimensions: 1650 x 1400 x 1500 mm , Hand Feed, Max. Speed: 1500 strokes per hour, Max. die cutting length: 1500 mm, Max. die cutting size: 750 x 520mm, Paper or cardboard thickness: 100-2000 gsm, Suitable paper 1-8 mm corrugated paper (including laminated), Total Power: 2.2kw, Total Weight: 2.2 Tons , Voltage: 220V 3PH 60Hz.
Die Cutter 2024 Royo Machinery ML750, S/N: 749780A, Paper size: 530 x 750 mm, Features: Central lubrication with auto pump , Dimensions: 1650 x 1400 x 1500 mm , Hand Feed, Max. Speed: 1500 strokes per hour, Max. die cutting length: 1500 mm, Max. die cutting size: 750 x 520mm, Paper or cardboard thickness: 100-2000 gsm, Suitable paper 1-8 mm corrugated paper (including laminated), Total Power: 2.2kw, Total Weight: 2.2 Tons , Voltage: 220V 3PH 60Hz.
Die Cutter 2025 Royo Machinery RDC-1060C, S/N: Pending, Paper size: 750 x 1050 mm, Features: Air clutch, Automatic pressure adjustment, CE Standard Machine, Central lubrication with auto pump , Corrugated board up to 4mm, Delivery Pile Height 1100 mm, Die cutting Precision: +/- 0.15mm, Dimensions: 4990 x 2700 x 2060 mm, Feeding Pile Height: 1380mm, Frontal back and side registration mechanism, Max. Speed: 8000 strokes per hour, Max. die cutting pressure: 250 Tons, Max. die cutting size 1060 x 780mm, Min. Paper size: 450 x 360mm, Min. gripper margin: 5mm, Non-stop delivery with rolling curtain, Paper or cardboard thickness: 100-2000 gsm, Pre-loader, Suggested HS code: 8441.4000 (Automatic), Total Power: 18kw, Total Weight: 17 Tons, Voltage: 220V 3PH 60Hz.
Royo Machinery is one of the world's most experienced suppliers of new and used printing, finishing and carton converting equipment worldwide. We have sold more new and used offset printing and finishing equipment to the Caribbean and Latin American printers than any other dealer over the last 77 years. Our exceptional relationship and understanding of the region gives our company a competitive edge over competitors.
The Royo Family has accumulated the expertise to help you with the logistics and the engineering required to manage the process of buying and selling new and used printing, finishing and converting machinery anywhere in the world. We offer additional services such as pre-purchase inspections, dismantling and removal, parts, cleaning and painting, rebuilding and retrofitting, transportation, installation and demonstration, after sales service and warranty, appraisals and professional consultation.
Being in the industry since 1948 has allowed us to build a global network dedicated to finding the new or used printing, finishing and carton converting equipment you might be looking for at the most competitive prices. Let us help you find the Offset press, Paper Cutter, Folder, Die Cutter, Box Folder Gluer, UV Coater, Roll Sheeter or Laminator you are looking for.
