New Equipment  - Search Result

Paper Knurling Machine RHC-520

Paper Knurling Machine RHC-520 Features: Working speed: 0-130m/min, Pneumatic unwind roll lift, Max. Unwind Diameter: 1200mm, Magnetic tensioning control, Honeycomb paper knurling, Electronic web guide, 3" air shafts for wind and unwind, Max. Roll width: 520mm, Weight: 2640 lbs, Power: 220 Volts 3 Phase 60Hz 6.5kW, Max. Rewind Diameter: 240mm, Dimensions: 2900 x 1900 x 1500 mm, Cutting method: 142x520mm Upper knife roller + 144x520 mm Lower knife roller.

Plastic Lid Making Machine   RP-420S

Plastic Lid Making Machine RP-420S Features: Water consumption: 60Liters/hr, Voltage: 220 Volts 3 Phase 60 Hz, Suitable material: HIPS/PVC/PET, Required sheet width: 430mm, Required sheet thickness: 0.15-0.5mm, Punching frequency: 8-32cycles/min, Power: 10KW, Max. forming depth: 50mm, Max. forming area: 410x300mm, Dimensions: 2700 x 830 x 1450 mm, Weight: 1000kg, Air pressure: 0.4-0.7MPa, Air consumption: 0.6-0.8m³/min, Waste rewinding, Roll-fed, Hole or cross-punching, Heat and vacuum forming.

Compressor RHB-5A

Compressor RHB-5A Features: Power: 4KW/5HP, Power: 220V/60HZ/3PH, Air tank: 300L, Air pressure: 8 bar, Air flow: 0.55 m3/min, Screw Compressor, Pressure releaf valve, Electronic drain valve, Air Filter, Refrigerated Compressed Air Dryer, Modular tank included.

Partition Making Machine RPC-1000

Partition Making Machine RPC-1000 Features: Speed: 120 pcs/min, Slotting width: 3.5mm 5mm 7mm, Power: 220 Volts 3 Phase 60Hz 1.1kW, Min. slotting distance: 40mm, Dimensions: 1500 x 1450x 1300 mm, Automatic back kick feeding, 9 groups of slotting knives, Vacuum-assisted automatic bottom feeder, Upper and lower slot knife side-to-side adjustment, Speed is controlled via a frequency converter, Max. corrugated board size: 1000 x 300 mm, Full-size conveyor belt, Cardboard stacking tray, Adjustable slot depth, 360-degree slotted phase adjustment.

Cutting Plotter RZCRT-3016E

Cutting Plotter RZCRT-3016E Features: Total Power: 9.0kW 220V 50/60Hz, Score/creasing tool, Suggested HS code: 8441.10.0000, Plotting Pen, Motor & Transmission: Servo motor with guided rail and synchronous belt, Materials: Cardboard paper PP plastic EVA magnetic corrugated board, Machine Language: HP-GL and GP-GL, Material hold down: Via vacuum, Functions: Full cut kiss cut half cut drawing and marking, Folding Carton Samplemaker, File Format: Standard DXF PLT and HPGL, Cutting Thickness: 0.5-25 mm, Cutting Speed: Straight line up to 3000mm/sec, Compatibility: AutoCAD CorelDraw Optitex Shoemaster RECAD Gerber etc., Working area: 3000 x 1600mm, Electric oscillating tool, Dimensions: 2480 x 1760 x 1540 mm, Cutting Speed: Straight line up to 1200mm/sec, Camera, Accuracy: +/-0.1mm, Touch screen LCD, Software resolution: 0.025mm, Machine resolution: 0.01mm, Divisional vacuum absorption, Air pump power: 9kw.

Pallet Jack RYC-HYD

Pallet Jack RYC-HYD Features: Power: 220V 50/60Hz, Suggested HS code: 8439.30.0000, Min. height: 85 mm, Max. load capacity: 3000 Kilos, Integral battery charger, battery level gauge, and emergency battery disconnect, Fork width: 220 mm, Fork length: 1160 mm, Electric forward and reverse with infinite adjustment, Electric & hydraulic lift, Max. height: 115 mm.

Cutting Plotter RT-1100

Cutting Plotter RT-1100 Features: Compatibility: AutoCAD CorelDraw Optitex Shoemaster RECAD Gerber etc., Accuracy: +/-0.1mm, Pertinax milling machine, Motor & Transmission: Servo motor with guided rail and synchronous belt, Material hold down: Via vacuum, Machine Language: HP-GL and GP-GL, File Format: Standard DXF PLT and HPGL, X Y Z axis travel: 1100 x 1080 x 90 mm, Working area: 1600 x 1800mm, Weight: 900 kg NW, Suggested HS code: 8441.10.0000, Cutting Thickness: 0.5-18 mm, Cutting Speed: Straight line up to 10 meters/min, 2.5KW 60000rpm Spindle.

Wide Flexo Press RPF-1300

Wide Flexo Press RPF-1300 Features: Max. printing width: 49.5", Plate mounting machine with camera, Photopolymer thickness: 1.14 1.7 2.28 2.84 & 3.94mm, Automatic flexo plate mounting machine.

Card cutting and collating machine RFQ-1020

Card cutting and collating machine RFQ-1020 Features: Weight: 9500 Kg, Total Power: 16.5 kW, Paper thickness: 128-450 gsm, Min. paper size: 470 x 360 mm, Max. speed: 3000 sheets/hour, Max. paper size: 1000 x 730 mm, Max. card size: 91 x 66 mm, Unique collection method of cards that guarantees the order of the deck, Inline packing or wrapping (optional), Dimensions: 244" x 249" x 73", Designed to cut paper or plastic sheets into cards with inline corner punching, Automatic card slitting and collating machine, Applicable paper format: 545 x 545 808 x 720 & 897 x 662 mm.

CTP RHDI-1600

CTP RHDI-1600 Features: Weight: 3307 lbs, Power: 8.5 kW, Max. plate size: 60" x 50", Dimensions: 90.94" x 57.08" x 44.88", Voltage: 220V Single Phase 50/60Hz, Thermal, Suitable for digital flexographic and photopolymer plates, Speed: Up to 2.5 m2/hour, Recommended operating temperature: 65-75 Farhrenheit, Resolution: 2400/4000 dpi, Recommended operating humidity: 20-70% (Without condensation), Min. plate size: 4" x 5", Manual plate load and unloading, Flexo CTP, 830nm laser, 32 Infrared laser diodes, 1-bit tiff interface RIP Included.

CTP RHDI-1200

CTP RHDI-1200 Features: Voltage: 220V Single Phase 50/60Hz, Thermal, Suitable for digital flexographic and photopolymer plates, Speed: Up to 2.5 m2/hour, Recommended operating temperature: 65-75 Farhrenheit, Resolution: 2400/4000 dpi, Recommended operating humidity: 20-70% (Without condensation), Min. plate size: 4" x 5", Manual plate load and unloading, Flexo CTP, 830nm laser, 32 Infrared laser diodes, 1-bit tiff interface RIP Included, Max. plate size: 39.37" x 50", Dimensions: 90.94" x 57.08" x 44.88", Power: 8.5 kW, Weight: 3307 lbs.

CTP RHDI-1100

CTP RHDI-1100 Features: Thermal, Suitable for digital flexographic and photopolymer plates, Recommended operating temperature: 65-75 Farhrenheit, Speed: Up to 2.5 m2/hour, Resolution: 2400/4000 dpi, Recommended operating humidity: 20-70% (Without condensation), Min. plate size: 4" x 5", Manual plate load and unloading, Flexo CTP, 830nm laser, 32 Infrared laser diodes, 1-bit tiff interface RIP Included, Weight: 2750 lbs, Voltage: 220V Single Phase 50/60Hz, Max. plate size: 40.00" x 30", Dimensions: 82.68" x 42.28" x 37.80" mm, Power: 7.5 kW.

CTP RHDI-800

CTP RHDI-800 Features: Weight: 1980 lbs, Resolution: 2400/4000 dpi, Speed: Up to 2.5 m2/hour, Thermal, Recommended operating temperature: 65-75 Farhrenheit, Min. plate size: 4" x 5", Max. plate size: 31.50" x 25", Flexo CTP, Dimensions: 69.75" x 40" x 35.50" mm, 830nm laser, 32 Infrared laser diodes, Voltage: 220V Single Phase 50/60Hz, Suitable for digital flexographic and photopolymer plates, Recommended operating humidity: 20-70% (Without condensation), Manual plate load and unloading, 1-bit tiff interface RIP Included, Power: 5.5 kW.

Cold & Hot Glue Applicator RH01-HF

Cold & Hot Glue Applicator RH01-HF Features: Touch screen LED display, Spray controller, Number of spray guns: Up to 4, Number of optical sensors: Up to 4, Fully programable pattern with memory, Power: 600W, Adhesive pressure: 5-20 Bars, Accuracy: +/-1 mm at 100 meters/min, Max. operating temperature: 220C / 392F, Hot melt adhesive spray gun, Hot melt adhesive feeding unit.

Slitter Rewinder RSR-1600

Slitter Rewinder RSR-1600 Features: Working speed: 100m/min, Total weight: 6600lbs, Total Power: 10 kW, Slitting width: > 30 mm, Max. Unwind Diameter: 1000mm, Max. Roll width: 1600mm, Max. Rewind Diameter: 1000mm, Dimensions (LxWxH): 4800 x 2850 x 1600 mm, Pneumatic paper tensioning control, 3" air shafts for wind and unwind.

Paper Bag Making Machine RTF-1100AT

Paper Bag Making Machine RTF-1100AT Features: Square bottom bag making machine, Top folding (Neck reinforcement): 30-70 mm, Speed: 0-70 pcs/min, Side folding (Gusset): 60-180 mm, Sheetfed paper bag-making machine, Paper Bag Width: 100-410 mm, Paper Bag Length: 200-580 mm, Laminated paper thickness: 157-350 gsm, Kraft paper thickness: 120-300 gsm, Min. paper size: 320 x 300 mm, Max. paper size: 1060 x 600 mm.

Tape Applicator RPA-50E

Tape Applicator RPA-50E Features: Working speed: 10-20 Cartons/min, Max. Carton size: 150-Unlimited x 150-500mm W x 120-500mm H, Left and Right Belt Driven Carton Sealer, Flap closer & sealer, Carton tape sealer, Adjustable Case Sealer, Total weight: 125kg, Power: 240W, Discharge table height: 600-720mm, Dimensions: 850x850x1350 mm, Conveyor speed: 18m/min, Adhesive tape width: 48/60/75mm, Power supply: 220V 50/60HZ 1 Phase.

Pouch Sachet Making Machine RMIC-600TZ

Paper Cup Making Machine RDW-22 Features: Ultrasonic welding, Sensor detection system, Sleve welding: Ultrasonic, Safety cage, Open Cam, Net Weight: 2400 KG, Multi-cup collector with chute delivery, Water-based glue spray on the inside of the sleeve, Automatic oil lubrication, Min. Air pressure: 60-90 psi - Air output: 3.5-11 ft3/min, Speed: 70-80 pcs/minute, Power: 5KW, Paper Cup Size: 4-16 oz, Material: Single PE coated paper, Machine size (L*W*H): 98.5" x 43.5" x 67" mm, Direct sleeve gluing option for embossed or corrugated sleeve, Auto suction of inverted cup and sleeve gluing, Auto bottom folding (for hollow sleeve cup), Material: 150-350 gsm single PE coated or printed paper.

Roll Sheeter RCM-1100A-1

Roll Sheeter RCM-1100A-1 Features: Suggested HS code: 8441.10.0000, Rotary upper knife and fixed lower knife, Self Adjusting Air Brakes, Rotary Knife, Paper tensioning control, Overlapper & piler, Waste Bag Extraction, Color LCD operating panel, Auto cut length adujstment system, 1x Roll Stand, Max. Cutting Speed: 300 cuts/min, Total Weight: 9000kg, Paper thickness: 60-550 gsm, Max. Paper Width: 1100mm, Hydraulic shaftless mill roll stands, Dimensions: 7831 x 2151 x 1850 mm, Delivery pile height: 1300mm, Cut-off range: 18-55", Cut off tolerance: +/- 0.1-0.5mm.

About Us

Royo Machinery is one of the world's most experienced suppliers of new and used printing, finishing and carton converting equipment worldwide. We have sold more new and used offset printing and finishing equipment to the Caribbean and Latin American printers than any other dealer over the last 76 years. Our exceptional relationship and understanding of the region gives our company a competitive edge over competitors.

The Royo Family has accumulated the expertise to help you with the logistics and the engineering required to manage the process of buying and selling new and used printing, finishing and converting machinery anywhere in the world. We offer additional services such as pre-purchase inspections, dismantling and removal, parts, cleaning and painting, rebuilding and retrofitting, transportation, installation and demonstration, after sales service and warranty, appraisals and professional consultation.

Being in the industry since 1948 has allowed us to build a global network dedicated to finding the new or used printing, finishing and carton converting equipment you might be looking for at the most competitive prices. Let us help you find the Offset press, Paper Cutter, Folder, Die Cutter, Box Folder Gluer, UV Coater, Roll Sheeter or Laminator you are looking for.

WohlenbergKomariManrolandPolarRyobiMBOGOSS
BobstMitsubishiMuller MartiniKolbusWifagKBA
Royo Machinery Chat Box
X
Hi there!
We are here to help!